| 100mm Heavy Duty Dual RIM Omnidirectional Wheel |
NR-W-OM-11 |
Rs.899.00
|
 |
100mm Heavy Duty Dual Rim Omnidirectional wheel. Most suitable for high performance robots, Robocon, Robocup, US First, Battle robots etc. |
|
| Quadrotor kit with Hobbyking i86 Multi-Rotor Control Board |
NR-QD-KIT-HK-i86 |
Rs.12,299.00
|
 |
This is a combination of essential components required to help you quickly build your own Quadrotor platform. It includes Hobbyking i86 Multi-Rotor Control Board, matched Quad Frame, BLDC motors, ESCs and propellers. |
|
| 6mm Coupling Kit for Omniwheel |
NR-OMN-CPL-6MM |
Rs.202.50
|
 |
This 6mm Shaft Motor Coupling Kit for 100mm Heavy Duty Dual RIM Omnidirectional Wheel. It can be used with any motor having 6mm Shaft diameter. |
|
| Quadrotor Mega DIY kit without flight controller |
NR-QDCB-01 |
Rs.20,999.00
|
 |
This is a combination of all the components required to help you quickly build your own Quadrotor platform. It includes matched Quad Frame, BLDC motors, ESCs, Propellers and all the other required accessories. |
|
| 8mm Coupling Kit for Omniwheel |
NR-OMN-CPL-8MM |
Rs.202.50
|
 |
This 8mm Shaft Motor Coupling Kit for 100mm Heavy Duty Dual RIM Omnidirectional Wheel. It can be used with any motor having 8mm Shaft diameter. |
|
| 106mm Diameter x 44mm Thick x 8mm Bore Wheel |
NR-W-106x44x8 |
Rs.99.00
|
 |
106mm Diameter x 44mm Thick x 8mm Bore Wheel is a jumbo sized wheel which is suitable for low cost all terrain robot. It is compatible with almost all the motors having 8mm diameter shaft. |
|
| Micromouse Chassis Kit |
NR-UM-CH-01 |
Rs.398.25
|
 |
This is Micromouse Chassis Kit made up of 1.5mm Aluminium. |
|
| Quadrotor kit without flight controller |
NR-QD-KIT-02 |
Rs.9,399.00
|
 |
This is a combination of most essential components required to help you quickly build your own Quadrotor platform. It includes matched Quad Frame, BLDC motors, ESCs and Propellers. |
|
| Berg strip 2X40 Female 2MM |
NR-CONBERG-F2-2X40 |
Rs.32.76
|
.jpg) |
It is 2X40 female low solder with 2 mm pitch. |
|
| Quadrotor kit with HobbyKing Multi-Rotor Control Board V3.0 |
NR-QD-KIT-HK-KK-V3.0 |
Rs.11,999.00
|
 |
This is a combination of essential components required to help you quickly build your own Quadrotor platform. It includes Hobbyking Multi-Rotor Control Board V3.0, matched Quad Frame, BLDC motors, ESCs and propellers. |
|
| Relimate 2510 7 pin |
NR-CONREL2510-7P |
Rs.15.40
|
 |
It is 7 pin male and female Relimate 2510 connector. It has pitch of 0.1 inch (2.54mm). Female connector has 28cm wires. |
|
| Heat Shrink Tube 2.5mm |
NR-HST-2.5MM |
Rs.10.01
|
 |
2.5mm Heat Shrink Tube available in multiple of 1 meter |
|
| MMA7361L ±1.5g, ±6g Three axis Accelerometer Module (Single Line) |
NR-S-ACC-3AX- MMA7361S |
Rs.499.00
|
 |
MMA7361L is a Three axis Low-G accelerometer with user selectable 1.5g or ±6g acceleration range. |
|
| 100 RPM Side Shaft 37mm Diameter Compact DC Gear Motor |
NR-GMD-SSC-37mm-100 |
Rs.349.00
|
 |
100 RPM, 12V, 10 kg-cm stall torque Side Shaft 37mm Diameter Compact DC Gear Motor. Suitable for small robots / automation systems. |
|
| Sensor Pod for GP2Y0A700K0F sharp sensor |
NR-POD-03 |
Rs.1,499.00
|
 |
Sensor pod for GP2Y0A700K0F sharp sensor is specially design for mounting sharp sensor GP2Y0A700K0F. The sensor pod for GP2Y0A700K0F sharp sensor is assembly of two Servo motor for precise control in any of pan and tilt direction on which sensor pod for GP2Y0A700K0F sharp sensor is mounted. The whole Sensor Pod for GP2Y0A700K0F sharp sensor can be easily mounted on any robot. |
|
| ATMEGA2560 Development Board Mini |
NR-M2560-DEV-BRD-MINI |
Rs.1,499.00
|
 |
ATMEGA2560 is a massive and one of the most feature rich AVR microcontroller from Atmel featuring 256K Flash, 8K RAM, 86 I/O lines arranged in nine 8 bit ports, 16 ADCs, 4 UARTs, 6 timers, 8 interrupts and much more. |
|
| General Purpose PCB(22cm x 19cm ) |
NR-B-GP-001 |
Rs.352.80
|
.jpg) |
This is a high quality glass epoxy general purpose PCB having Size: 22cm x 19cm. It is used for rapid prototyping design. |
|
| Plastic Enclosure 13.4x7.8x6.7 |
NR-EL-PL-002 |
Rs.129.00
|
 |
Black Plastic Enclosure Length: 13.4 cm, Width: 7.8 cm, Height: 6.7 cm. |
|
| 200 RPM, 120 Watt Thor Heavy Duty Worm DC Gear motor |
NR-GMD-THOR-WRM-200-120W |
Rs.7,600.00
|
 |
200 RPM, 120 Watt Thor Heavy Duty Worm DC Gear motor is suitable for larger robots, Robowars, industrial automation, etc. |
|
| 100 RPM, 75 Watt Thor Heavy Duty Inline DC Gear motor |
NR-GMD-THOR-INL-100-75-W |
Rs.4,499.00
|
 |
100 RPM, 75 Watt Thor Heavy Duty Inline DC Gear motor is suitable for larger robots, Robowars, industrial automation, etc. |
|