| DYNAMIXEL AX-12W |
902-0063-000 |
Rs.5,664.00
|
 |
The AX-12W servo actuator from Robotis is a wheeled variant of the popular AX-12A. Essentially this servo is an AX-12A with a lower gear ratio so that a much higher RPM can be achieved, making it ideal for use in 'Wheel Mode' as opposed to the traditional 'Joint Mode'.The AX-12W robot servo has the ability to track its speed, temperature, voltage, and load.As if this weren't enough, the control algorithm used to maintain shaft position on the ax-12 actuator can be adjusted individually for each |
|
| DYNAMIXEL AX-18A |
902-0005-001 |
Rs.12,363.00
|
 |
The AX-18A servo is faster and has more torque than the AX-12A (AX-18A - 18kgf/cm and 97 rpm vs. AX-12A - 15kgf/cm and 59 rpm) and it is 100% compatible with all AX-12A brackets and assessories.The AX-18A is a newer version of the AX-18F with the but a more advanced external design. It is with the former AX-18F at 1:1 scale and with the same control method. |
|
| DYNAMIXEL AX-12A 6pcs Bulk |
902-0010-001 |
Rs.29,921.00
|
 |
The DYNAMIXEL AX-12A is a new version of the AX-12+ with the same performance, but with a more advanced external design. It is 100% compatible with the AX-12+ on a 1:1 scale, with the same control method. |
|
| DYNAMIXEL AX-12A |
902-0003-001 |
Rs.5,664.00
|
 |
The DYNAMIXEL AX-12A is a new version of the AX-12+ with the same performance, but with a more advanced external design. It is 100% compatible with the AX-12+ on a 1:1 scale, with the same control method. The AX-12A servo actuator from Robotis is the most advanced actuator on the market in this price range and has become the defacto standard for the next generation of hobby robotics. |
|
| DYNAMIXEL AX-18A 6pcs Bulk |
902-0044-001 |
Rs.63,415.00
|
 |
The AX-18A servo is faster and has more torque than the AX-12A (AX-18A - 18kgf/cm and 97 rpm vs. AX-12A - 15kgf/cm and 59 rpm)
And it is 100% compatible with all AX-12A brackets and assessories
The AX-18A is a newer version of the AX-18F with the same performance, but a more advanced external design. It is 100% compatible with the former AX-18F at 1:1 scale and with the same control method. |
|
Print
