This is a S3C6410 ARM11 development board with a 4.3" TFT LCD. This board comes with a 256MB DDR RAM, 1GB NAND Flash, WinCE / Linux / Android support, advanced Video / graphic support with 3D acceleration.
This development board has good documentation in English.
Specifications:
- Dimensions: 110 x 110 mm
- CPU: 533 MHz Samsung S3C6410A ARM1176JZF-S with VFP-Unit and Jazelle (max freq. 667 MHz)
- RAM: 256 MB DDR RAM, 32 bit Bus
- Flash: 1GB NAND Flash
- EEPROM: 1024 Byte (I2C)
- Ext. Memory: SD-Card socket
- Serial Ports: 1x DB9 connector (RS232), total: 4x serial port connectors
- IR: Infrared Receiver
- USB: 1x USB-A Host 1.1, 1x miniUSB Slave/OTG 2.0
- Audio Output: 3.5 mm stereo jack
- Audio Input: Condenser microphone
- Ethernet: RJ-45 10/100M (DM9000)
- RTC: Real Time Clock with battery
- Beeper: PWM buzzer
- Camera: 20 pin Camera interface (2.0 mm)
- TV Output: Composite video
- LCD Interface: 4.3"
- Touch Panel: 4 wire resistive
- User Inputs: 8x push buttons and 1x A/D pot
- User Outputs: 4x LEDs
- Expansion: 40 pin System Bus, 30 pin GPIO, 20 pin SDIO (SD, SPI, I2C), 10 pin Buttons (2.0 mm)
- Debug: 10 pin JTAG (2.0 mm)
- Power: regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter)
- Power Consumption: Mini6410: 0.25 A, Mini6410 + 4.3" LCD: 0.5 A
- OS Support
- Linux2.6.36 + Qtopia-2.2.0 + Qt-Extended-4.4.3 + QtE-4.7.0
- WindowsCE.NET 6.0(R3)
- Android 2.3.2 + Linux-2.6.36
- Ubuntu-0910
Box contains:
- 1 x mini6410 development board
- 1 x TFT LCD: 4.3", 240x320, with touch panel
- 1 x usb cable
- 1 x Power adaptor (+5V)
- 1 x Ethernet cable
- 1 x DB9 serial null modem cable
- 1 x CD
|