Print Print
Print
10 Rs CouponMotor Mounting Kit for Plastic Gear Motor

NEX AVR USB ISP STK500V2
View Full-Size Image


NEX AVR USB ISP STK500V2

Product ID: NR-P-009
Weight: 125 gms
Price: Rs.807.79

Ask a question about this product

  
In Stock: 6

Introduction

NEX AVR USB ISP STK500V2 is a high speed USB powered STK500V2 compatible In-System USB programmer for AVR family of microcontrollers. For Windows7 it can be used in HID mode with Avrdude command prompt as programming interface. Its adjustable clock speed allows programming of microcontrollers with lower clock speeds. The programmer takes power directly from PC’s USB port which eliminates need of external power supply. The programmer can also power the target board from PCs USB port with limited supply current of up to 100mA.

Note: The USB port of PC provides 5V DC. For 3.3V microcontrollers, please use appropriate voltage regulators.

Note: NEX Robotics USB ISP programmer GUI has not been tested on 64-bit operating system.

The NEX AVR USB ISP STK500V2 comes with an easy to use GUI for programming the AVR family of microcontrollers. The GUI works on Windows 7(32 Bit), Windows Vista(32 Bit) and Windows XP(32 Bit) please set the NEX AVR USB ISP STK500V2 programmer to HID mode for use with GUI.

Nex Avr Usb Isp_V2 GUI

 

Note: Please set the NEX AVR USB ISP STK500V2 programmer to HID mode for use with GUI.
Loading bootloader.a90 file (available from Nex-Robotics) via STK500v2, will take approximately 15 minutes on certain microcontrollers like ATmega2560.

Note: If mode is HID, insert HID/CDC jumper (J2) and if mode is CDC, remove HID/CDC jumper (J2).

Note: We have tested stk500v2 programmer on ATmega8, ATmega16, ATmega32, ATmega64, ATmega128, ATmega640 and ATmega2560. We will provide support only for the above mentioned microcontroller. Technical support will not be provided for other microcontrollers.

Downloads

NEX AVR USB ISP STK500V2 GUI

NEX AVR USB ISP STK500V2 User Manual

USB Drivers and Software

Features

  • Low cost USB compatible (No legacy RS232 required)
  • Compatible with STK500V2
  • Supported by AVRdude on Win7/XP/Vista
  • Jumper adjustable programming clock speeds for low clock speed microcontrollers. Low speed ranges from 32 KHz to 1MHz.
  • Programs almost all AVR microcontrollers (Refer Table below)
  • Jumper selectable HID/CDC mode.
  • USB powered
  • Jumper enabled 5V power supply for target boards
  • Standard 10 pin (5x2) programming connector
  • Power and programming activity indicator LEDs
  • No external power supply required

Package Contains

  • 1 x NEX AVR USB ISP STK500V2
  • 1 x 10 Pin FRC Cable
  • 1 x USB Cable

 

Supported AVR Microcontroller

AT90
tinyAVR
megaAVR
megaAVR contd..
xmegaAVR
AT90S1200
ATtiny2313
ATmega8515
ATmega3250P
ATxmega128A1
AT90S2313
ATtiny2313A
ATmega8535
ATmega3290
ATxmega128A3
AT90S2323
ATtiny11
ATmega48(P)
ATmega3290P
ATxmega128D3
AT90S2343
ATtiny12
ATmega8
ATmega32C1
ATxmega16A4
AT90S4414
ATtiny13
ATmega8(A)
ATmega32HVB
ATxmega16D4
AT90S4434
ATtiny13(A)
ATmega88(P)
ATmega32M1
ATxmega192A3
AT90S4433
ATtiny15
ATmega88(PA)
ATmega32U2
ATxmega192D3
AT90S8515
ATtiny167
ATmega8HVA
ATmega32U4
ATxmega256A3
AT90S8535
ATtiny22
ATmega8U2
ATmega32U6
ATxmega256A3B
AT90CAN32
ATtiny24
ATmega16
ATmega103
ATxmega256D3
AT90CAN64
ATtiny24(A)
ATmega16A
ATmega128
ATxmega32A4
AT90CAN128
ATtiny25
ATmega16HVA
ATmega1280
ATxmega32D4
AT90PWM2
ATtiny26
ATmega16HVB
ATmega1281
ATxmega64A1
AT90PWM216
ATtiny261
ATmega16M1
ATmega1284P
ATxmega64A3
AT90PWM2B
ATtiny28
ATmega16U2
ATmega128A
ATxmega64D3
AT90PWM3
ATtiny44
ATmega16U4
ATmega128RFA1
AT90PWM316
ATtiny45
ATmega161
ATmega2560
AT90PWM3B
ATtiny48
ATmega163
ATmega2561
AT90PWM81
ATtiny461
ATmega164(P)
ATmega64
AT90USB646
ATtiny84
ATmega164(PA)
ATmega644
AT90USB647
ATtiny85
ATmega162
ATmega644P
AT90USB1286
ATtiny88
ATmega168(P)
ATmega644PA
AT90USB1287
ATtiny861
ATmega168(PA)
ATmega645
AT90USB82
ATtiny861(A)
ATmega165
ATmega649
ATmega165P
ATmega640
ATmega169
ATmega6450
ATmega169P
ATmega6490
ATmega1650
ATmega1690
ATmega32
ATmega32A
ATmega323
ATmega324P
ATmega324PA
ATmega328P
ATmega325
ATmega325P
ATmega329
ATmega329P
ATmega3250


ROHS Compliant : NO


Customer Reviews:

There are yet no reviews for this product.
Please log in to write a review.


You may also be interested in this/these product(s)

ATMEGA128 Board
ATMEGA128 Board
Rs.780.82



Customers who bought this product also bought this/these product(s)

10 Pin AVR ISP FRC Cable for AVR ISP
10 Pin AVR ISP FRC Cable for AVR ISP
Rs.25.79