PrintE-mail
24V, 6Amp SMPS24V,10Amp SMPS

XBee-PRO (S2B) 63mw Wireless Communication Module (Wire antenna)
View Full-Size Image


XBee-PRO (S2B) 63mw Wireless Communication Module (Wire antenna)

Product ID: NR-RF-S2B-02
Weight: 40 gms
Price: Rs.2,471.26

Ask a question about this product

  

Usually ships in:

not_available.gif

Introduction:

XBee ZB PRO(a.k.a. Series 2) module improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. Series 2 modules allow you to create complex mesh networks. this module has the lowest current draw of any Digi RF product. However, the infrastructure of a ZigBee network is more complex and requires more configuration to fully impliment. This module can give range of 90 meters indoor or 3200meters outdoor. This XBee wireless device can be directly connected to the serial port (at 3.3V level) of your microcontroller. By using a logic level translator it can also be interfaced to 5V logic (TTL) devices having serial interface. This module supports data rates of up to 250kbps. They are designed for high-throughput(35kbps) applications requiring low latency and predictable communication timing. Series 1 and Series 2B XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2B modules.

Specifications:

  • Model code: XB24-BZ7WIT-004
  • Operating Frequency: ISM 2.4 GHz
  • Antenna type: Wire antenna
  • Indoor/Urban Range up to 300 ft. (90 m)
  • Outdoor RF line-of-sight Range up to 2miles (3200 m)
  • Interface: Serial(UART) at 1200 - 1 Mbps
  • Supply Voltage: 2.7 – 3.6V
  • Transmit Current 205mA (@ 3.3 V)
  • Receive Current 47mA (@ 3.3 V)
  • Dimensions: 0.960” x 1.297” (2.438cm x 3.294cm)
  • Operating Temperature: -40 to 85º C (industrial)

Features:

  • Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
  • Number of Channels: (software selectable) 14 Direct Sequence Channels
  • Addressing Options: PAN ID and Addresses,Cluster IDs
  • No. of Channels: 11 to 25
  • AT and API Command Modes for configuring module parameters
  • 8 Digital IO pins
  • Fully FCC certified
  • Transmit Power: 63 mw(+18 dBm)
  • Receiver Sensitivity: -102 dBm
  • RoHS: Compliant

Documents

Manual_XBee/XBee-PRO ZB RF Module.pdf
XBee USB Wireless Module
Mechanical Drawing XBee - XBee Pro OEM RF Modules.pdf
Users Guide XCTU Configuration & Test Utility Software.pdf
White Paper Demystifying 802.15.4 and ZigBee®.pdf

Visit forum for Online Discussion on this product



ROHS Compliant : YES


Customer Reviews:

There are yet no reviews for this product.
Please log in to write a review.


You may also be interested in this/these product(s)

USB to RS-232 Converter
USB to RS-232 Converter
Rs.871.95

USB to Serial TTL/CMOS Logic
USB to Serial TTL/CMOS Logic
Rs.639.00

XBee (S2) 2mw Wireless Communication Module (Wire antenna)
XBee (S2) 2mw Wireless Communication Module (Wire antenna)
Rs.4,130.00