Introduction:
ATMEGA2560 is a massive and one of the most feature rich AVR microcontroller from Atmel featuring 256K Flash, 8K RAM, 86 I/O lines arranged in nine 8 bit ports, 16 ADCs, 4 UARTs, 6 timers, 8 interrupts and much more. ATMEGA2560 Development Board exposes all the pins of the microcontroller in neat PORT wise configuration. It is made from double sided PTH PCB board to provide extra strength to the connector joints for increased reliability. Board can work on 7 to 15V AC or DC supply. It has built-in reverse polarity protection. 7805 voltage regulator has heat sink for heat dissipation so that it can supply 1Amp current continuously without getting over heated. It has switches for boot loading, reset and power. It also has Xbee/USB interface based on FT232. All the ports are connected to standard 10 pin FRC connectors.
Note: You need to buy USB cable, 12V/1AMP Adaptor and XBee wireless modules separately.
Specifications:
- Microcontroller: ATMEGA2560 with 14.7456MHz crystal (Also supports ATMEGA640/128)
- Double side high quality PTH PCB for added strength.
- Power: 7 to 15V, AC or DC, Heat sink on 7805 for better current rating
- Reverse polarity protected
- Switches: Boot, Reset, Power
- Xbee/USB serial interface
- 10 pin FRC connectors for all ports
- Application examples in AVR studio provided in the documentation CD
ATMEGA2560 Microcontroller Features:
- Advanced RISC Architecture
- Up to 16 MIPS Throughput at 14.7456 MHz
- 256K Bytes of In-System Self-Programmable Flash
- 8K Bytes RAM
- 4K Byte Internal SRAM
- 86 Programmable I/O Lines arranged in nine 8 bit ports
- In-System Programming by On-chip Boot Program
- 16-channel, 10-bit ADC
- Two 8-bit Timer/Counters with Separate Prescaler and Compare Modes
- Four 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture
- Real Time Counter with Separate Oscillator
- Twelve 16 bit and Four 8 bit PWM Channels,
- Four Programmable Serial USART
- Eight external interrupts
- Master/Slave SPI Serial Interface
- Byte-oriented Two-wire Serial Interface
- Programmable Watchdog Timer with Separate On-chip Oscillator
- 100 pin TQFP package
Package contains:
- ATMEGA2560 Development Board Mini integrated with Xbee/usb interface
- CD containing user guide, example codes in AVR studio and software
Application Examples with 20X4 Serial LCD
Download Manual
Recommended Programmer:
Bootloader utility for loading firmware via USB port of the PC without any need of external programmer.
Visit forum for Online Discussion on this product
|
Print
