Print Print
Print
P89V51RD2 Development Board25 Rs Coupon

Ultrasonic Range Finder LV EZ2-MB1020
View Full-Size Image


Ultrasonic Range Finder LV EZ2-MB1020

Product ID: NR-S-UL-LVEZ2-MB1020
Weight: 4 gms
Price: Rs.1,751.74

Ask a question about this product

  

Usually ships in:

not_available.gif

Introduction

EZ2 (EZ Series) is an indoor, compact, low cost easy to use ultrasonic range sensor with narrower beam width than other EZ1 Series Ultrasonic sensor from MaxBotix. EZ2 is a good compromise between sensitivity and side object rejection and it is an excellent choice for applications that require slightly less side object detection and sensitivity than EZ1. It gives range output in terms of analog voltage, serial data and PWM signals. You can cascade many of these sensors together to take distance reading of the surrounding area without any interference from the adjacent sensor.
To select correct sensor for your application refer to Sensor Selection Guide
With 2.5V - 5.5V power the EZ2 provides very short to long-range detection and ranging, in an incredibly small package. It detects objects from 15cm to 645 cm (6 inches to 254 inches) with the resolution of 2.5cm (1 inch). Objects closer than 6 inches range as 6 inches. It gives range output in the Analog, Pulse Width Modulation (PWM) and in the serial format which makes it very convenient for interfacing. EZ0 to EZ4 sensors have progressively narrower beam width. Select sensor according to your application.

Specifications

  • Wide Beam angle (EZ2 sensor Beam width explanation)
  • Range: 15cm to 645cm (6 inches to 254 inches)
  • Resolution: 2.5cm (1inch)
  • 2.5V to 5.5V supply with 2mA typical current draw
  • Range data output format:
    -Analog: (Vcc/512)/inch
    -Pulse Width Modulation (PWM): 147uS / 2.5cm or 147uS / inch
    -Serial (9600 baud rate)
  • Data refresh rate: Up to 50 milliseconds (20Hz)
  • Free run mode operation: continually measure and output range information
  • Triggered mode operation: provides the range reading as desired
  • Sensor operating frequency: 42KHz

Note:

Sensor part numbers are combination of a six characters base followed by a dash and three digit product code.For more details about product code Click Here

  • F-Option
  • P-Option
  • Dimensions

    Ultrasonic Range Finder EZ0 Dimension

    Documents

    EZ2 sensor datasheet
    EZ2 sensor Beam width explanation
    Maxbotics FAQ

    Sensor Selection Guide:

    LV-MaxSonar-EZ XL-MaxSonar-EZ XL-MaxSonar-AE XL-MaxSonar-WR XL-MaxSonar-WRA
    Maximum range 254 inches
    (6.45meters)
    765cm / 1068cm
    (model specific)
    765cm / 1068cm
    (model specific)
    765cm / 1068cm
    (model specific)
    765cm / 1068cm
    (model specific)
    Data output Analog, Serial, PWM Analog, Serial, PWM Analog, Serial Analog, Serial, PWM Analog, Serial

    Real time analog output of the Acoustic Waveform

    No No Yes No Yes
    Distance Resolution 1 inch< 1cm 1cm 1cm 1cm
    Readings per second 20 10 10 10 10
    Current at 3.3V / 5V 1.6 / 1.9mA 2.1 / 3.4mA 2.1 / 3.4mA 2.1 / 3.4mA 2.1 / 3.4mA
    Aucstic frequency 42KHz 42KHz 42KHz 42KHz 42KHz
    Working conditions Indoor Indoor Indoor Outdoor (IP67 rating) Outdoor (IP67 rating)

    Area of Usage

    Hobby Hobby / Industry Hobby / Industry Industry / Hobby Industry / Hobby
    Automatic Calibration to
    Compensate for Changes
    in Temperature, Voltage,
    Humidity and Noise.
    On Power up only Real-Time Real-Time Real-Time Real-Time
    Trigger or Free-run
    Operation
    Yes Yes Yes Yes Yes
    Noise cancelling Some Yes Yes Yes Yes
    Minimum reported distance 6 inches 20cm 20cm 25cm 25cm
    Minimum Object Detection
    Distance(1)
    0 inches 0cm 0cm 0cm 0cm

    Visit forum for Online Discussion on this product



    ROHS Compliant : YES


    Customer Reviews:

    There are yet no reviews for this product.
    Please log in to write a review.