N2830, 1300Kv Brushless DC Outrunner Motor

Product ID: NR-Quad-BLDC-03
Weight: 59 gms
Price: Rs.942.95

Ask a question about this product

In Stock: 1

Introduction:

This sturdy size 2830, 1300kv BLDC motor gives maximum thrust of 920gms and weights only 56gms. It has pretty good electrical efficiency because of its precision built and high quality parts. It is best suited for medium and large size Quadrotor (quadcopter), Hexacoptor, Octacoptor etc. Its rotor shaft is made up of hardened steel and supported by sealed dual bearings. It comes with propeller mount with 5mm diameter. You can fit most of the propellers from NEX Robotics on this motor. This motor can be run by 2 to 4 cell lithium polymer batteries.

Kit contains:

One N2830, 1300Kv Brushless DC Outrunner Motor
One motor mount with four mounting screws
One Propeller adaptor

Note:

Because of vibrations during operation allen grubs, nuts etc may come off. To prevent this apply Thread Locker on all the grubs, nuts, bolts etc.
Use M3 Nylon Nut and M3 bolts in your construction.

Recommended propellers:

For 2-3 cell Lithium Polymer battery pack:

10x4.5 inch (25x 11cm) Pusher and Puller Propeller Matched Pair

Recommended Motor Driver:

20Amp BLDC ESC
30A BLDC ESC
40Amp BLDC ESC

Recommended Battery packs for Quadrotor / Hexacoptor / Octacoptor

Lithium Polymer 3 Cell, 11.1V, 3300mAh, 20C discharge Battery
Lithium Polymer 3 Cell, 11.1V, 5000mAh, 20C discharge Battery
Lithum Polymer 4 cell, 14.8V 3300mHA discharge Battery
Lithium Polymer 4 Cell, 14.8V, 5000mAh, 20C discharge Battery

Specifications:

KV(rpm/v): 1300
Max Power: 190W
Max Thrust: 920 grams
Weight: 53 grams
Shaft Diameter: 3.175mm
Shaft Length: 45mm
Recommended Propeller for battery: 12x4.5 for 2S battery; 10x4.5 for 4S battery
Battery: 2S-4S Li-Po
ESC(A): 30A

Dimensions:

Motor Diameter: 28mm
Motor Length: 30mm
Shaft Diameter: 5mm
Shaft Length: 65.5mm

BLDC Motor size comparison