MMA6361L ±1.5g, ±6g Two axis Accelerometer Module (Single Line)

Introduction

MMA6361L is a Two axis Low-G accelerometer with user selectable 1.5g or ±6g acceleration range. Board has all the necessary components required for the accelerometer. Board comes with onboard 3.3V Low Drop voltage regulator. Accelerometer module can be powered from 2.2V to 6V. MMA6361L accelerometer has user selectable g range of 1.5g and 6g and sleep mode to reduce power consumption.

Possible applications of this board include Robotics, Tilt and Motion Sensing, Image Stabilization, Navigation and Dead Reckoning, Tilt Compensation in inertial sensors, 3D-Gaming, Event recorder etc.

Features

• Acceleration along X, Y axis.
• High sensitivity of 800mV/g @1.5g
• User selectable acceleration range of ±1.5g or ±6g
• Sleep mode to reduce power consumption when sensor is not in use.

• Onboard 3.3V Low Drop voltage regulator with input range of 3.6V to 6V.
• Supply voltage (Vdd): 2.2V to 3.6V @ 400μA (accelerometer supply range)
• Sleep mode current: 10 μA
• Sensitivity:
  1.5g : 800 mV/g
  6g : 206 mV/ g
  
• Static Acceleration : XOUT,YOUT
  @ -1g: 0.85V
  @ 0g: 1.65V
  @ +1g: 2.45V
  
• Bandwidth:
  X, Y axis: 400Hz
  
• Output Impedance : 32KΩ

Package contains

MMA6361L ±1.5g, ±6g two axis Low-G Accelerometer Module (Single Line)
9 pin female Berg connector.

Downloads

Product Manual
MMA6361L Datasheet

Visit forum for Online Discussion on this product

Customer Reviews: