Ultrasonic Range Finder AEL1 (MB 1361)

Introduction
The MB1361 have a new high power output along with real-time auto calibration for changing conditions (temperature, voltage or acoustic or electrical noise) that ensure you receive the most reliable (in air) ranging data for every reading taken. The MB1361 low power 3.3V to 5V operation provides very short to long-range detection and ranging, in a tiny and compact form factor. The MB1361 detect objects from 0-cm* to 1068-cm (35 feet) and provide sonar range information from 20-cm out to1068-cm with 1-cm resolution. Objects from 0-cm* to 20-cm typically range as 20-cm. (*Objects from 0- mm to 1-mm may not be detected.) The interface output formats included are Real time analog voltage envelope, analog voltage output, and serial digital output.
To select correct sensor for your application refer to Sensor Selection Guide

Specifications

• Range: Long range 20cm to 1068cm (35 feet)
• Resolution: 1cm
• Real-time auto calibration
• 3.3V to 5V supply with very low average current draw
• Range data output format:
  -Analog: (VCC/1024)/cm (4.9mV/cm for 5V and 3.2mV/cm for 3.3V)
  - Real time analog voltage envelope
  -Serial (9600 baud rate)
• Data refresh rate: Up to 100 milliseconds (10Hz)
• Free run mode operation: continually measure and output range information
• Triggered mode operation: provides the range reading as desired

Documents

AEL1MB1361 sensor datasheet
Maxbotics FAQ
Sensor Selection Guide

Visit forum for Online Discussion on this product

Customer Reviews: