Ultrasonic Range Finder XL-AE1 (MB 1310)

Introduction

AE1Ultrasonic Range Finder is a high power sensor with noise from the Maxbotics. AE1 1(MB1310) have a new high power output transducer along with real-time auto calibration for changing conditions (temperature, voltage or acoustic or electrical noise) that ensure you receive the most reliable (in air) ranging data for every reading taken. The MB1310 consumes very low power at 3.3V – 5V operation provides very short to long-range detection and ranging, in a tiny and compact form factor. The MB1310 detect objects from 0-cm* to 645cm (25.1 feet) and provide sonar range information from 20-cm out to 765-cm with 1-cm resolution. Objects from 0-cm* to 20-cm typically range as 20-cm. (*objects from 0-mm to 1-mm may not be detected). The interface output formats included real time analog voltage envelope, analog voltage output, and serial digital output.
To select correct sensor for your application refer to Sensor Selection Guide

Specifications

• Range: 0cm to 645cm (7 inches to 254 inches)
• Resolution: 1cm
• 3.3V to 5V supply with very low average current draw
• Range data output format:
  -Analog: (VCC/1024)/cm (4.9mV/cm for 5V and 3.2mV/cm for 3.3V)
  -Real time analog voltage envelope
  -Serial (9600 baud rate)
• Data refresh rate: Up to 100 milliseconds (10Hz)
• Free run mode operation: continually measure and output range information
• Triggered mode operation: provides the range reading as desired
• Sensor operating frequency: 42KHz

Documents

AE1 sensor datasheet
AE1 sensor Beam width explanation
Maxbotics FAQ
Sensor Selection Guide

Sensor Selection Guide:

Note: For detailed information refer to Sensor Selection Guide

Visit forum for Online Discussion on this product

Customer Reviews: