Nex Robotics

Your Shopping Cart

Your Cart is currently empty.


You are here: Home Products Wireless Devices RN-XV WiFi to serial Module
24V,10Amp SMPSUniversel 0.65mm 160 Pin QFP PCB

RN-XV WiFi to serial Module
View Full-Size Image

RN-XV WiFi to serial Module

Product ID: NEX-WR-WIFI-001
Weight: 50 gms
Price: Rs.4,718.65

Ask a question about this product



The RN-XV module is a certified Wi-Fi to serial solution especially designed for customers who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware. It acts as an effective Wi-Fi to serial converter that can be used with any of the XBee USB and TTL interfacing module for enhanced Wi-Fi connectivity beteen your embedded solutions.

The RN-XV module is based upon Roving Networks' robust RN-171 Wi-Fi module and incorporates 802.11 b/g radio, 32 bit processor, TCP/IP stack, real-time clock, crypto accelerator, power management unit and analog sensor interface.

The RN-XV module supports infrastructure networking for worldwide internet access directly by every node and adhoc connectivity for fully connected point to point networks, unlike many 802.15.4 implementations that need extensive, custom application profiles and additional bridging products. The RN-XV supports industrial temperature ranges, making it ideal for applications such as sensor networks, industrial or commercial controllers, utility meters, and M2M applications.

The module offers additional functionality through its on-board programmable GPIOs (8) and ADCs (3). The ADCs provide 14-bit resolution while the GPIOs can be configured to provide standard functionality or status signaling to a host microcontroller to reduce the need for serial polling between the Wi-Fi module and host microcontroller.

The module is pre-loaded with Roving firmware to simplify integration and minimize development time of your application. In the simplest configuration, the hardware only requires four connections (PWR, TX, RX and GND) to create a wireless data connection.

Developers can opt to use the RN-174 evaluation board for prototyping and designing their Wi-Fi systems based on the RN-XV. The RN-174-K kit includes the RN-171 module mounted on a carrier board with status LEDs, power regulation, and a serial link to a PC.


  • Networking Standards: IEEE 802.11 b/g
  • Data rates: 802.11 b: 1,2, 5.5,11 Mbps : 802.11 g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
  • Frequency Band: 2.412 - 2.484 GHz
  • Modulation: 802.11 b: DSSS(CCK-11, CCK-5.5, DQPSK-2, DBPSK-1): 802.11g : OFDM
  • Wi-Fi security: WEP, WPA, WPA2
  • Protocols: DHCP, DNS, ARP, ICMP, FTP client, HTTP client, TCP, UDP
  • Supply voltage: 3.3V ±10%
  • Output power: 0dBm to +12dBm
  • Power consumption: 4uA sleep, 35mA active RX, 180mA TX (at +12dBm)
  • Data rate: 464Kbps over UART
  • Operating temperature range: -40C to +85C
  • Transmit power: Up to 150 meters (at +12dBm)
  • Interface: UART, Wi-Fi
  • Antenna: Wire antenna, SMA connector, U.Fl connector
  • Certifications: FCC, ICS, CE, Wi-Fi Alliance


  • Direct internet connectivity provides internet access to every node
  • Point to point connectivity to every node without the need for custom profiles
  • Based on common 802.15.4 footprint
  • Ultra low power: 4uA sleep mode, 38mA active
  • Onboard TCP/IP stack includes DHCP, UDP, DNS, ARP, ICMP, HTTP client, FTP client and TCP
  • Firmware configurable transmit power: 0dBm to 12dBm
  • Hardware interfaces: TTL UART
  • Host data rate up to 464Kbps over UART
  • Supports Adhoc and infrastructure networking
  • 8 general purpose digital I/O
  • 3 analog sensor inputs
  • Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes
  • Accepts 3.3VDC regulated power supply
  • Configuration over UART or wireless interface (via Telnet) using simple ASCII commands
  • Over the air firmware upgrade (FTP)
  • Secure Wi-Fi authentication: WEP, WPA-TKIP , WPA2-AES


  • Industrial metering
  • HVAC control
  • Room temperature sensors
  • Pump configuration and control
  • Telemetry
  • Robotics
  • PV / Solar controllers


User manual and resources
Product page

Visit forum for Online Discussion on this product

ROHS Compliant : NO

Customer Reviews:

There are yet no reviews for this product.
Please log in to write a review.

You may also be interested in this/these product(s)

XBee-PRO (S2B) 63mw Wireless Communication Module (Wire antenna)
XBee-PRO (S2B) 63mw Wireless Communication Module (Wire antenna)

XBee (S2) 2mw Wireless Communication Module (Wire antenna)
XBee (S2) 2mw Wireless Communication Module (Wire antenna)

USB TV Tuner Stick
USB TV Tuner Stick

Customers who bought this product also bought this/these product(s)

ATMEGA128 Board
ATMEGA128 Board
PCB Printing Sheet 14cm x 10.6
PCB Printing Sheet 14cm x 10.6
PCB Etching Powder Fe2Cl3
PCB Etching Powder Fe2Cl3

Contact Us

Please use HELPDESK to contact us.

Tel: +91-022-27782445

09.30 AM to 06.00 PM IST, Monday - Saturday

Address :
Nex Robotics Pvt Ltd.
Unit No. 13,
Building No. 2 (A3), Sector 1,
Millennium Business Park,
Mahape, Navi Mumbai 400 710,
Maharashtra, INDIA

NEX Robotics location on map


Find out more about latest research work being done at NEX Robotics. Here you will find links/papers demonstrating research done on our latest development platforms.


Nex robotics has added support for Microsoft Robotics Developer Studio (MRDS) on FireBird V research platform. FireBird V is one of the most widely deployed research platforms designed by Department of CSE, IIT Bombay and Nex robotics.


NEX Robotics has designed Intelligent autonomous transport vehicle for transporting personals autonomously inside the campus and for advance research in mobile robotics.

Read more..

Newsletter Subscribe


We Accept

Currency Selector