100 RPM Side Shaft Super Heavy Duty DC Gear Motor

Introduction

100 RPM Side Shaft Super Heavy Duty DC Gear Motor is suitable for bigger robots / small automation systems. It has sturdy construction with large gears. Gear box is built to handle the stall torque produced by the motor. Drive shaft is supported from both sides with metal bushes. Motor runs smoothly from 4V to 12V and gives 100 RPM at 12V. Motor has 8mm diameter, 19mm length drive shaft with D shape for excellent coupling.

Table below gives fairly good idea of the motor’s performance in terms of RPM vs voltage at no load and that of stall torque at different voltages.

Note: This motor will be bit noisy while running.

Specifications

• RPM: 100 at 12V
• Voltage: 4V to 12V
• Stall torque: 50 Kg-cm at stall current of 6.9 Amp.
• Shaft diameter: 8mm
• Shaft length: 25 to 30mm
• Gear assembly: Spur
• Brush type: Carbon
• Motor weight: 370gms
• Dimension: Refer to diagram below

Side Shaft Super Heavy Duty DC Gear Motor Dimension

Note: No load current will be less than 1/7th of stall current

Recommended wheels

106mm Diameter x 44mm Thick x 8mm Bore Wheel

Recommended Chassis: 4 WD Basic Chassis 2

Recommended Motor drivers
For large loads: Hercules series motor drivers

For moderate loads: L298 46V, 2A Stepper Motor / Dual DC Motor Driver

Package contains

100 RPM Side Shaft Super Heavy Duty DC Gear Motor

Customer Reviews: