Nex Robotics

Your Shopping Cart

Your Cart is currently empty.


You are here: Home Products Electronic Components ACS714 5Amp Hall Effect Current Sensor Module
ACS714 20Amp Hall Effect Current Sensor ModuleTact Switch

ACS714 5Amp Hall Effect Current Sensor Module
View Full-Size Image

ACS714 5Amp Hall Effect Current Sensor Module

Product ID: NR-CS-ACS714-5A
Weight: 1 gms
Price: Rs.597.42

Ask a question about this product

In Stock: 19


The ACS714 5Amp current sensor provides economical and precise solutions for AC or DC current sensing in robotics and automotive applications. Typical applications include motor control, load detection and management, switch-mode power supplies, and over current fault protection. The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage. The output of the device has a positive slope (>VIOUT(Q)) when an increasing current flows through the primary copper conduction path (from pins 1 and 2, to pins 3 and 4), which is the path used for current sampling. The internal resistance of this conductive path is 1.2 mΩ typical, providing low power loss. The thickness of the copper conductor allows survival of the device at up to 5× over current conditions. The terminals of the conductive path are electrically isolated from the signal leads (pins 5 through 8). This allows the ACS714 to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques.


  • Single 5V supply operation.
  • Optimized Input range (IP) : +/- 30Amp
  • Sensitivity : 185mV/Amp
  • Low noise analog signal path,
  • Stable output offset voltage
  • Bandwidth is set via a filter capacitor
  • 1.2mOhm internal copper conductor resistance
  • 2.1kVRMS minimum isolation voltage
  • Ratio metric output is possible from supply voltage

Package contains

ACS714 5Amp Hall Effect Current Sensor Module


Product Manual

ACS714 Datasheet

Visit forum for Online Discussion on this product

ROHS Compliant : YES

Customer Reviews:

There are yet no reviews for this product.
Please log in to write a review.

Customers who bought this product also bought this/these product(s)

1N4148 200mA Diode
1N4148 200mA Diode
1 to 1 Black Connector
1 to 1 Black Connector
1 to 1 Red Connector
1 to 1 Red Connector
10 PIN FRC Cable
10 PIN FRC Cable

Contact Us

Please use HELPDESK to contact us.

Tel: +91-022-27782445

09.30 AM to 06.00 PM IST, Monday - Saturday

Address :
Nex Robotics Pvt Ltd.
Unit No. 13,
Building No. 2 (A3), Sector 1,
Millennium Business Park,
Mahape, Navi Mumbai 400 710,
Maharashtra, INDIA

NEX Robotics location on map


Find out more about latest research work being done at NEX Robotics. Here you will find links/papers demonstrating research done on our latest development platforms.


Nex robotics has added support for Microsoft Robotics Developer Studio (MRDS) on FireBird V research platform. FireBird V is one of the most widely deployed research platforms designed by Department of CSE, IIT Bombay and Nex robotics.


NEX Robotics has designed Intelligent autonomous transport vehicle for transporting personals autonomously inside the campus and for advance research in mobile robotics.

Read more..

Newsletter Subscribe


We Accept

Currency Selector