100 RPM Side Shaft Heavy Duty DC Gear Motor

Introduction

100 RPM Side Shaft Heavy Duty DC Gear Motor is suitable for large robots / automation systems. It has sturdy construction with gear box built to handle stall torque produced by the motor. Drive shaft is supported from both sides with metal bushes. Motor runs smoothly from 4V to 12V and gives 100 RPM at 12V. Motor has 8mm diameter, 17.5mm length drive shaft with D shape for excellent coupling.

Table below gives fairly good idea of the motor’s performance in terms of RPM vs voltage at no load and that of stall torque at different voltages.

Note: This motor will be bit noisy while running.

Specifications

• RPM: 100 at 12V
• Voltage: 4V to 12V
• Stall torque: 32Kg-cm at stall current of 4.1A@12V
• Shaft diameter: 8mm
• Shaft length: 17.5mm
• Gear assembly: Spur
• Brush type: Carbon
• Motor weight: 290gms
• Dimension: Refer to diagram below

Dimensions

Motor performance specifications

Note: No load current will be less than 1/7th of stall current

Recommended wheels

Any wheel with 8mm diameter bore can be used with this motor
106mm Diameter x 44mm Thick x 8mm Bore Wheel

Recommended Motor drivers for large loads

Hercules Lite 6V-16V, 8Amp Motor Driver with Current Sensing
8V-28V, 5Amp Dual DC Motor Driver with Current Sense
Hercules 6V-16V, 16Amp Motor Driver with Current Sensing

Recommended Motor drivers for moderate loads

L298 46V, 2A Stepper Motor / Dual DC Motor Driver

Package contains

100 RPM Side Shaft Heavy Duty DC Gear Motor

Customer Reviews: