Nex Robotics

Your Shopping Cart




Your Cart is currently empty.

   

You are here: Home Products Sensors Ultrasonic Range Finder I2CXLEZ0-MB1202
PrintE-mail
SN754410NE Motor Driver ICHeat Shrink Tube 5mm

Ultrasonic Range Finder I2CXLEZ0-MB1202
View Full-Size Image


Ultrasonic Range Finder I2CXLEZ0-MB1202

Product ID: NR-S-UL-I2CEZ-MB1202
Weight: 6 gms
Price: Rs.2,716.60

Ask a question about this product

  
In Stock: 50
Usually ships in:

5week.gif

Introduction

The I2CXL-MaxSonar-EZ series is the first MaxSonar ultrasonic sensor to feature the I2C interface. The sensor have high acoustic power output along with real-time auto calibration for changing conditions (voltage and acoustic or electrical noise) that ensure users receive the most reliable (in air) ranging data for every reading taken.

The I2CXLEZ0-MB1202 offers the widest and most sensitive beam pattern of the I2CXL-MaxSonar-EZ sensors that are offered. This makes the I2CXLEZ0-MB1202 an excellent choice wherever wide beam detection, reliable people detection, or reliable small obstacle detection are required.

This sensor provides very short to long-range detection and ranging, in a tiny and compact form factor. It detect objects from 0-cm to 765-cm (25.1 feet) and provide sonar range information from 20-cm out to 765-cm with 1-cm resolution. Objects from 0-cm to 20-cm typically range as 20-cm.

Note: Object from 0-mm to 1-mm may not be detected.

Specifications/Features

  • Resolution: 1-cm
  • Data refresh rate: up to 40Hz
  • Range: 20cm to 765cm (25 Feet)
  • Sensor operates at 42kHz
  • Virtually no sensor dead zone, objects closer than 20 cm will typically range as 20 cm
  • Operating voltage: 3V-5.5V
  • Average current requirement: 4.4mA
  • Operational Temperature from 0°C to +65°C (32°F to +149°F)
  • I2C bus communication allows rapid control of multiple sensors with only two wires
  • Easy control of multiple sensors
  • Control up to 127 sensors using two wires
  • Firmware filtering for better noise tolerance and clutter rejection
  • Widest beam pattern in I2CXL-MaxSonar-EZ sensor family
  • Status pin available to determine sensor state also Power-up address reset pin is available

Multiple Sensor Reference Wiring Diagram
Adding additional sensors to the I2C bus is extremely simple, as long as each sensor is programmed first to a different address, and the bus capacitance is low enough for the pull-up resistors to work properly. GND, V+, SCL and SDA simply need to be connected to the existing wires that the bus operates on. Each sensor can then be addressed individually to perform a range finding cycle or return the range data.
Note: For more detail refer datasheet.

Ultrasonic Range Finder EZ0 Dimension

Dimensions

Ultrasonic Range Finder EZ0 Dimension

Documents

I2CXL-EZ0 sensor datasheet
I2CXL-EZ0 sensor Beam width explanation
Maxbotics FAQ

Visit forum for Online Discussion on this product



ROHS Compliant : YES


Customer Reviews:

There are yet no reviews for this product.
Please log in to write a review.


Contact Us

Please use HELPDESK to contact us.

Tel: +91-022-27782445

09.30 AM to 06.00 PM IST, Monday - Saturday

Address :
Nex Robotics Pvt Ltd.
Unit No. 13,
Building No. 2 (A3), Sector 1,
Millennium Business Park,
Mahape, Navi Mumbai 400 710,
Maharashtra, INDIA

NEX Robotics location on map

RESEARCH

Find out more about latest research work being done at NEX Robotics. Here you will find links/papers demonstrating research done on our latest development platforms.

NEWS

Nex robotics has added support for Microsoft Robotics Developer Studio (MRDS) on FireBird V research platform. FireBird V is one of the most widely deployed research platforms designed by Department of CSE, IIT Bombay and Nex robotics.

Read more...


NEX Robotics has designed Intelligent autonomous transport vehicle for transporting personals autonomously inside the campus and for advance research in mobile robotics.

Read more..

Newsletter Subscribe

FOLLOW US


We Accept

Currency Selector


Testimonals